VH₂O₂ decontamination meets the requirements of critical environments exposed to a high microbiological risk. Solidfog technologies are based on airborne surface disinfection to treat complex volumes, hard-to-reach areas and sensitive equipment, within a strict regulatory framework.
Solidfog applications cover multiple industrial and scientific contexts, with controlled cycles that are traceable and validatable in accordance with applicable standards.
Cleanroom decontamination
Controlling microbial contamination in cleanrooms is an ongoing challenge for environments subject to GMP requirements. Large volumes, high equipment density and hard-to-access surfaces limit the effectiveness of manual methods.
Airborne VH₂O₂ decontamination enables uniform distribution throughout the entire volume. Dry-fog atomization reaches elevated or obstructed areas without human intervention. Cycles remain traceable and validated in accordance with EN 17272, with a demonstrated 6-log microbial reduction.
This application covers production areas, laboratories, animal facilities and hospital environments, for routine decontamination or preventive control of microbiological risk.
Decontamination airlocks (MAL & passbox)
Decontamination airlocks ensure the safe transfer of materials between zones with different cleanliness classes. These disinfection airlocks vary greatly in size, from large MAL airlocks to small-capacity passboxes.
Solidfog dry-fog VH₂O₂ technology ensures uniform, controlled distribution regardless of the airlock’s geometry. Cycle parameters are adapted to each configuration to guarantee high operational availability, especially for airlocks used several times per day.
RABS & Isolator decontamination
RABS and isolators are contained environments that require a precise, adaptable decontamination technology compliant with regulatory requirements for aseptic operations.
Solidfog’s VH₂O₂ dry-fog technology is specifically designed for integration into RABS and isolators, delivering reproducible cycles with a demonstrated 6-log sporicidal reduction. Decontamination is applied throughout the entire contained volume, including mechanical interfaces, transfer areas and complex internal geometries, with full traceability in compliance with GMP requirements and 21 CFR Part 11.
Laminar air flow & biosafety cabinets (BSC)
Laminar air flow hoods and biosafety cabinets require reliable, validated decontamination across a range of contexts. These operations take place after work campaigns, prior to maintenance activities or during HEPA filter replacement.
Solidfog has developed a dedicated kit based on DosyMist® dry-fog VH₂O₂ technology. This device enables full decontamination of the equipment, including filters and internal areas, with documented and reproducible cycles.
Validated applications compliant with regulatory requirements
All Solidfog applications rely on equipment that meets current quality standards. Systems comply with ISO 9001, EN 17272 and GMP principles.
Cycles provide full traceability, an audit trail and compliance with 21 CFR Part 11. Qualification protocols and calibration certificates are available for critical components.
Need an application tailored to your environment ?
Each environment has specific constraints in terms of volumes, equipment and regulatory requirements. Solidfog teams assess these parameters to define the VH₂O₂ application best suited to your operational context.
Contact our teams to discuss your VH₂O₂ decontamination project.